steel posts for wood fencesBe kind and compassionate... Ephesians 4:32
Why put the money and time into a wood privacy fence only to have the posts rot out in just a few years? When the cost of concrete and gravel are included the VersaPost does not cost much more than a wood post. Use our concrete calculator and see for yourself. The VersaPost functions as a line, end, corner or gate post. It requires no special clips or brackets. With the VersaPost the entire fence can be installed by one person.
Always use high quality wood for the rails and pickets. Cedar is the standard as it is naturally rot-resistant. We recommend full-cut cedar stringers and thick rough-surface pickets. Contrary to popular opinion, cedar fences do not need to be stained or painted. Cedar when left untreated will over time turn a beautiful shade of gray.
Composite and vinyl fence companies try to mimic this gray color. Names such as "Weathered Cedar", "Cape Cod Gray", "Natural Cedar" and others are used to describe these products. But there is no need to spend a lot of money to get this color. For a maintenance free wood fence simply let the cedar weather. If you like, the fence can also be stained a light gray initially. As the stain eventually wears off the wood will show its own natural gray color.
Do not want a gray fence? Wood fences can also stained almost any color imaginable. When correctly applied the stain will last for many years. Always use a high quality oil-based stain. Apply the stain with a garden sprayer and then work the stain into the wood with a short bristle brush. A properly stained wood fence will not require re-staining for 10-15 years.
With the VersaPost you can have a beautiful, and maintenance free, wood fence. If you have any questions about the VersaPost please use the Contact form. If you would like a quote please use the Quote form at the bottom of the "Buy" page.Thank you.
|Minimum Yield Strength||50,000 PSI|
|Dimensions||2.56" x 1.62"|
|Flat Side Penetrations||0.188" on 6" centers|
|Side Penetrations||0.313" x 0.188" on 1" centers|
|Wind Load Rating||70+ MPH|